Nursing covers are a necessity for breastfeeding moms. They provide privacy and allow you to nurse in public without feeling exposed. Making your own nursing cover is easy and can be done with a few simple supplies.
You will need a piece of fabric that is at least 42 inches wide and 60 inches long, a sewing machine, thread, and scissors. Start by folding the fabric in half width-wise so that it is 21 inches wide. Sew along the long side of the fabric, leaving a 3-inch opening at the top.
Turn the nursing cover right-side out and press flat. Top stitch around the entire perimeter of the nursing cover. Now you have a beautiful, homemade nursing cover that can be used to discreetly breastfeed your baby in public!
- Choose the right fabric
- You’ll want a light, breathable fabric that will drape well
- Cut two rectangles of fabric to the desired size
- The standard size is 27″x 36″
- Hem the top and bottom of both rectangles of fabric
- Sew the two pieces of fabric together along the sides, leaving a small opening at one end for turning inside out later
- 5 Trim any excess thread and turn the nursing cover inside out through the opening you left earlier
- Iron flat and sew the opening closed
How Can I Cover My Breast While Breastfeeding?
There are a few ways to cover your breasts while breastfeeding. You can use a blanket, nursing cover, or even a shirt.
A blanket can be used to cover up while you are nursing.
You can drape the blanket over your back and shoulders, or hold it up in front of you. This will give you some privacy while you are feeding your baby. A nursing cover is another option for covering up while breastfeeding.
These covers fit over your shoulders and around your neck, providing full coverage for your chest. Nursing covers come in a variety of colors and patterns, so you can find one that suits your style. You can also simply wear a shirt while breastfeeding.
If you choose this option, look for a loose fitting shirt that will allow easy access to your breast. A button down shirt works well for this purpose. You can unbutton the shirt and pull it down when it’s time to nurse, then rebutton it when you’re finished.
How Do You Make a Udder Cover?
Assuming you would like a tutorial on how to create a cow udder cover:
What You’ll Need:
-1/4 yard of black spandex or other 4-way stretch fabric
-1/4 yard of white spandex or other 4-way stretch fabric -Thread to match your fabrics -Pins
-Scissors -A sewing machine (or you can hand sew if you’d prefer) Instructions:
1. Cut two ovals out of the black fabric, these will be your udder covers. Make sure they are big enough to comfortably fit over your own breasts. If you need help with this step, look at a picture of a cow’s udder for guidance.
2. Pin the two ovals together and sew around the edge, leaving an opening at the top. Be sure to backstitch at the beginning and end so that your seam is strong. 3. Cut four small rectangles out of the white fabric.
These will be used to create straps that go over your shoulders and under your arms, similar to a tank top. Sew these rectangles onto the inside of the black ovals, evenly spacing them out. Again, be sure to backstitch at the beginning and end for strength.
4. Try on your new udder cover and make any adjustments necessary before finishing up the final steps.
How Do You Wrap a Nursing Cover?
Assuming you are referring to a cloth nursing cover:
First, find a comfortable place to sit or stand with baby. Drape the nursing cover over your shoulders, making sure the fabric is pulled tight behind your neck so it doesn’t fall down.
Pull one side of the fabric across your chest and secure it with the built-in clip or button at the shoulder. Then bring baby under the nursing cover and position him/her at the breast. The excess fabric can be draped over baby’s back for privacy and comfort.
How Do You Make a Nurse Shawl?
When it comes to making a nurse shawl, there are a few things that you will need to take into consideration. First and foremost, you will need to choose the right fabric. A good rule of thumb is to select a fabric that is lightweight and breathable, such as cotton or linen.
Additionally, you will want to make sure that the fabric is comfortable against your skin and won’t cause irritation. Once you have selected the right fabric, it’s time to start thinking about the design of your shawl. If you are looking for something simple and elegant, a rectangular shape with straight edges might be the best option for you.
However, if you want something a little more unique, you could try an asymmetrical design or even add some embellishments like beads or sequins. Once you have decided on the overall look of your shawl, it’s time to start putting it together. To do this, you will first need to cut out two pieces of fabric in your chosen size and shape.
Next, pin the two pieces of fabric together at the sides and sew them together using a sewing machine or needle and thread. Finally, hem the edge of your shawl so that it has a nice finished look. And there you have it!
Your very own nurse shawl!
Nursing Cover Sewing Pattern
If you’re a nursing mom, chances are you’ve thought about using a nursing cover. Nursing covers provide privacy while breastfeeding in public, and can also help to keep baby warm. If you’re handy with a sewing machine, you can make your own nursing cover using this easy sewing pattern.
You’ll need 1 yard of cotton fabric, 1 yard of batting or quilt wadding, and 1/2 yard of bias binding tape. Cut the fabric and batting into two rectangles measuring 36″ x 42″. Sew the two pieces of fabric together along one long side and one short side, leaving an opening for turning.
Trim the corners and turn right side out. Press flat and top stitch around the entire perimeter. To finish, simply bind the raw edges with bias binding tape.
That’s it! You now have a handmade nursing cover that is sure to come in handy.
This blog post provides detailed instructions on how to make a nursing cover for breastfeeding. It includes a list of materials needed and step-by-step instructions for sewing the cover. The author also includes photos to illustrate the process.
This project should take about an hour to complete.